Evaluation of thermally treated asbestos based on fiber number concentration determined by transmission electron microscopy

Appropriate treatment of asbestos waste is a significant problem. In Japan, inertization of asbestos-containing waste by novel techniques approved by the Ministry of the Environment is now promoted. A quantitative method of testing with high sensitivity to the asbestos levels present in the inertization products is required for the approval process, but many testing methods are only qualitative. Thus, we have developed an evaluation method for asbestos in inertized products, consisting of the extraction of fibers from inertized products and determination of fiber number concentration by transmission electron microscopy. We adopted this testing method to evaluate thermally treated asbestos. It was found that fiber number concentrations of thermally treated asbestos decreased with increased treatment temperature, and were below the environmental level (10² Mf/g) at more than 1000 °C for chrysotile and crocidolite and more than 1400 °C for amosite and other amphibole forms of asbestos.     

Spatiotemporal variability in recruitment around Iriomote Island, Ryukyu Archipelago, Japan: implications for dispersal of spawning corals

Spatiotemporal recruitment patterns of scleractinian corals were investigated around Iriomote Island, Ryukyu Archipelago, Japan, in relation to adult coral cover in 2005 and 2006. Although almost all corals were broadcasting spawners, the relationship between recruitment and adult coral cover differed among coral families (Acroporidae, Poritidae, and Pocilloporidae), likely due to differences in embryonic development time. For spawning pocilloporid corals, whose larvae develop relatively more rapidly, recruitment was higher at sites where adult coral cover was higher. In contrast, recruitment was not related to adult coral cover in acroporid and poritid corals, whose embryonic development times were relatively slow. Moreover, recruitment of acroporid corals varied between years, and recruitment was greater at leeward compared to windward reefs for a few days after spawning. These results suggest that embryonic development time and wind-driven surface currents affect larval dispersal and subsequent recruitment patterns at a local scale. Based on embryonic development time, some spawning corals are more likely to have higher rates of self-seeding than others. Our results predict that among spawning corals, local populations of acroporid and poritid corals, whose larvae potentially disperse over long distances and recruit in neighboring reefs, are more resilient to local disturbances than those of pocilloporid corals, whose recruitment relies upon local stock.     

Atmospheric NO2 and CO concentration in Lima,Peru

The atmospheric concentration of NO2 in Lima, Peru was measured through 1 year using passive samplers. The concentration was stable and evident seasonal change was not observed. Also, the distribution of NO2 concentration in entire Lima was monitored twice in different seasons. The average NO2 concentrations at 33 and 27 sites of these monitoring were 17.1 and 15.3 ppb, respectively. NO2 distribution was high in the downtown area and decreased gradually with distance from there. The wind that almost always blew from the ocean had a great influence on it. High NO2 level and the change of CO concentration suggest that the residential area in the northeast side forms a topological channel among hills to blow out the pollutants from the downtown area.     

Emission inventory of deca-brominated diphenyl ether (DBDE) in Japan

Atmospheric emissions of deca-brominated diphenyl ether (DBDE) in Japan were estimated based on the material flow of DBDE products and their emission factors. In 2002, the demand for DBDE in Japan was 2200 ton/year and the stock level was about 60 000 ton. The DBDE flow into the waste stream was estimated to be about 6000 ton/year and the flow out through second-hand product exports was more than 700 ton/year. Home appliance recycling facilities dismantle and crush domestic wastes containing about 600 ton of DBDE annually. Material recycling of crushed plastics is not commonly practiced as yet. Emission factors from plastics processing (2 × 10⁻⁹–1 × 10⁻⁷), textile processing (9 × 10⁻⁷), home appliance recycling (8 × 10⁻⁹–5 × 10⁻⁶), and waste incineration (1 × 10⁻⁷–2 × 10⁻⁶) were estimated using field measurement data. The DBDE emission rate through house dust during the service life of final products (2 × 10⁻⁷–9 × 10⁻⁷ per year) was estimated using the DBDE concentration in dust and the amount of dust in used televisions. Emission factors from previous studies were also used. The estimated total DBDE emission was 170–1800 kg/year. These results suggest the necessity of characterizing emissions during the service life of products, which is essential information for formulating an appropriate e-waste recycling strategy.     

Effect of phosphorus fluctuation caused by river water dilution in eutrophic lake on competition between blue-green alga Microcystis aeruginosa and diatom Cyclotella sp.

Tega-numa (Lake Tega) is one of the eutrophic lakes in Japan. For the improvement of water quality in Lake Tega, the Northchiba Water Conveyance Channel was constructed in 2000, which transfer water from Tone River into the lake. After 2000, the dominant species of diatoms, mainly Cyclotella sp., have been replacing blue-green algae, mainly Microcystis aeruginosa in Lake Tega. This transition of dominant species would be due to the dilution, but the detail mechanism has not been understood yet. This study examined the relationship between phosphorus fluctuation caused by river water dilution to Lake Tega and dominance of algal species, M. aeruginosa or Cyclotella sp. based on the single-species and the mixed-species culture experiments. The single-species culture experiment showed that the half-saturation constant and uptake rate of phosphorus were one order lower and seven times higher for M. aeruginosa than those for Cyclotella sp. These findings implied that M. aeruginosa would possess a potential for the growth and survival over Cyclotella sp. in the phosphorus limited condition. The superiority of M. aeruginosa was reflected in the outcome of the mixed-species culture experiment, i.e., dominance of M. aeruginosa, even phosphorus concentration was lowered to 0.01 mg-P/L. Therefore, it could be concluded that the decrease in phosphorus concentration due to the river water dilution to Lake Tega would be interpreted as a minor factor for the transition of dominant species from M. aeruginosa to Cyclotella sp.     

Mercury contamination in human hair and fish from Cambodia: levels, specific accumulation and risk assessment

Mercury (Hg) concentrations in human hair and fish samples from Phnom Penh, Kien Svay, Tomnup Rolork and Batrong, Cambodia, collected in November 1999 and December 2000 were determined to understand the status of contamination, and age- and sex-dependent accumulation in humans and to assess the intake of mercury via fish consumption. Mercury concentrations in human hair ranged from 0.54 to 190mug/g dry wt. About 3% of the samples contained Hg levels exceeding the no observed adverse effects level (NOAEL) of WHO (50mug/g) and the levels in some hair samples of women also exceeded the NOAEL (10mug/g) associated with fetus neurotoxicity. A weak but significant positive correlation was observed between age and Hg levels in hair of residents. Mercury concentrations in muscle of marine and freshwater fish from Cambodia ranged from <0.01 to 0.96mug/g wet wt. Mercury intake rates were estimated on the basis of the Hg content in fish and daily fish consumption. Three samples of marine fish including sharp-tooth snapper and obtuse barracuda, and one sample of sharp-tooth snapper exceeded the guidelines by US EPA and by Joint FAO/WHO Expert Committee on Food Additives (JECFA), respectively, which indicates that some fish specimens examined (9% and 3% for US EPA and JECFA guidelines, respectively) were hazardous for consumption at the ingestion rate of Cambodian people (32.6g/day). It is suggested that fish is probably the main source of Hg for Cambodian people. However, extremely high Hg concentrations were observed in some individuals and could not be explained by Hg intake from fish consumption, indicating some other contamination sources of Hg in Cambodia.     

Leaching of brominated flame retardants in leachate from landfills in Japan

Leachate samples were taken from seven different landfills and concentrations of brominated flame retardants (BFRs), i.e. polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), were quantified. Leaching characteristics of BFRs, especially factors affecting leachability, were clarified to obtain basic information regarding the release of BFRs into the environment. The results obtained for observed levels of the sum of PBDE-47, -99 and -100 were n.d.--4000 pg/l for the raw leachate and n.d. for the treated one, respectively, and those of TBBPA were n.d.--620,000 pg/l for the raw leachate and n.d.--11,000 pg/l for the treated one, respectively. Three sites that not only had crushed material from bulk wastes such as waste electric and electronic equipment, but also were under operation or within a year since closure, indicated a higher concentration of BFRs than the other sites. In particular extremely high concentration of PBDEs was observed at a site with a large amount of organics. Considering the leaching characteristics of BFRs, there exists the possibility that leachability of PBDEs is influenced by the presence of dissolved humic matter (DHM) in the leachate. The high removal efficiency for BFRs in the leachate treatment process was also confirmed.     

Metallic-phase lead in slag of municipal solid waste incineration ash and leaching characteristics

Metallic phases in slags and their influence on the leaching characteristics were investigated. The proportions of metallic phase in four slags were 0.028%, 0.24%, 1.87%, and 3.05% by weight. The lead content was 10–248 mg/kg in bulk slag after metal removal, while in the metallic phase it was 579–7390 mg/kg. Lead concentrations in the metallic phase were more than ten times higher than in slags after metal removal. Lead was distributed in the metallic phase at 2.0%, 8.3%, 10.3%, and 47.4%. The concentrations of all metallic elements in metallic phases were much higher than in bulk slag. Iron, copper, and nickel had accumulated in magnetic metals, while aluminum and zinc were found in nonmagnetic metals. As regards chromium, manganese, lead, and tin, the proportion of metallic phases depended on the slag samples. By removing metallic phases, both water and pH 4 leachable lead decreased. The basic principles of melting residues containing lead are the separation of lead as a metal in reductive melting, and the containment of lead ions into uniform glassy particles in oxidization melting. Melting slag can be seen to contribute to environmental preservation by facilitating the recycling of materials through the separation of metals from melting slag. Received: February 21, 2000 / Accepted: July 27, 2000     

Combinatorial bio/chemical analysis of dioxin and dioxin-like compounds in waste recycling, feed/food, humans/wildlife and the environment.

The present review describes international activities using bioassays/biomarkers in combination with chemical analysis to measure the effects of dioxin and dioxin-like compounds (DLCs) in the environment. The above authors reviewed already the state-of-art bioanalytical detection methods (BDMs) for dioxins and DLCs [Environ Int (2001)]. The aim of this study will be to review applications of these bioassays/biomarkers to evaluate potential dioxins and DLCs. The present literature study lists relative potencies (REPs) of polyhalogenated dibenzo-p-dioxins and -furans (PXDD/Fs; X = Cl, Br, F), their thio analogues polychlorinated dibenzothiophenes (PCDTs) and thianthrens (PCTAs), polyhalogenated biphenyls (PXBs), polychlorinated naphthalenes (PCNs) and other Ah receptor agonists measured by several biodetectors (Tier 3 screening). The authors will discuss some examples of the applications of some of these biodetectors in biomonitoring programmes and recently occurred dioxin crisis in feed/food. The diagnosis of the biopotency of these pollutants in technical processes like thermally treated waste, waste water treatment, landfill leachate treatment, commercial PCB-mixtures, the release into the environment (soil, air and water) and the final intake into wildlife and humans will be reviewed.     

Thermal destruction of wastes containing polychlorinated naphthalenes in an industrial waste incinerator

A series of verification tests were carried out in order to confirm that polychlorinated naphthalenes (PCNs) contained in synthetic rubber products (Neoprene FB products) and aerosol adhesives, which were accidentally imported into Japan, could be thermally destroyed using an industrial waste incinerator. In the verification tests, Neoprene FB products containing PCNs at a concentration of 2800 mg/kg were added to industrial wastes at a ratio of 600 mg Neoprene FB product/kg-waste, and then incinerated at an average temperature of 985 °C. Total PCN concentrations were 14 ng/m³N in stack gas, 5.7 ng/g in bottom ash, 0.98 ng/g in boiler dust, and 1.2 ng/g in fly ash. Destruction efficiency (DE) and destruction removal efficiency (DRE) of congener No. 38/40, which is considered an input marker congener, were 99.9974 and 99.9995 %, respectively. The following dioxin concentrations were found: 0.11 ng-TEQ/m³N for the stack gas, 0.096 ng-TEQ/g for the bottom ash, 0.010 ng-TEQ/g for the boiler dust, and 0.072 ng-TEQ/g for the fly ash. Since the PCN levels in the PCN destruction test were even at slightly lower concentrations than in the baseline test without PCN addition, the detected PCNs are to a large degree unintentionally produced PCNs and does not mainly stem from input material. Also, the dioxin levels did not change. From these results, we confirmed that PCNs contained in Neoprene FB products and aerosol adhesives could be destroyed to a high degree by high-temperature incineration. Therefore, all recalled Neoprene FB products and aerosol adhesives containing PCNs were successfully treated under the same conditions as the verification tests.